SY8-CYCLONE
CompactPCI® Serial • FPGA Based Universal Networking Platform
The SY8-CYCLONE is a CompactPCI© Serial peripheral board, equipped with a powerful FPGA,
and up to ten RJ45 connectors for 100BASE-TX Ethernet.
With its PCI Express© x4 interface, the Cyclone©-V FPGA can be used e.g. as Ethernet NIC, switch, router, or gateway.
Industrial Ethernet real time protocols and custom specific applications may be integrated.
As a 4HP front panel width solution the SY8-CYCLONE provides five RJ45 connectors.
As an option, the board is available with ten Ethernet ports in a 8HP width front panel.
A reference design based on Quartus© is available as starting point for customers.
|
|
The Intel© (formerly Altera) 5CGXFC7C6F23I7N Cyclone©-V FPGA operates over the industrial temperature range
and contains 150K logic elements, and also hard IP for the PCIe Express© controller.
In addition to non-volatile I2C memory, 512MB DDR3L soldered RAM is wired on-board to the Cyclone©-V FPGA.
As an option, the SY8-CYCLONE card can accommodate a mezzanine module with a secondary identical FPGA.
This would allow either safety critical applications by redundancy, or additional logic elements for custom specific solutions.
|
|
Feature Summary
|
General
- PICMG© CompactPCI© Serial (CPCI-S.0) peripheral slot board
- Single Size Eurocard 3U 100x160mm2, front panel width 4HP or 8HP
- CompactPCI© Serial backplane connector P1 for up to x4 PCI Express® lanes/link
FPGA
- Intel© (Altera) 5CGXFC7C6F23I7N FPGA
- Hard IP PCI Express© interface
- Industrial temperature range -40°C to +85°C
- Logic elements 150K
- Adaptive logic modules (ALM) 56480
- Register 225920
- Variable-precision DSP blocks 156
- 18 x 18 multiplier 312
- Alternate scalable FPGA devices on request (C4, C5, C9)
Networking
- Five RJ45 front panel Ethernet connectors w. integrated magnetics
- Option additional five RJ45 front panel Ethernet connectors w. mezzanine card
- C80-EXP mezzanine card available (8HP common front panel assembly)C
- 100BASE-TX & 10BASE-T Ethernet
- PHYs TLK110, suitable for industrial Ethernet (e.g. EtherCAT, SERCOSIII, VARAN, ProfiNET, Ethernet/IP)
- PHYs wired via RMII I/F to FPGA differential I/O
- FPGA IP based Ethernet MACs (RMII)
Special Features
- Two mezzanine connectors SC1/SC2 for optional mezzanine card C80-EXP (5 x PHY)
- Scalable networking design 5 x RJ45 w. 4HP front panel width, 10 x RJ45 w. 8HP F/P
- Alternate usage of SC1/SC2 for custom specific I/O
- Mezzanine connector SD1 for C81-SI optional secondary FPGA mezzanine card (scalable FPGA design - single or dual FPGA solution)
- Alternate usage of SD1 for custom specific I/O and test/debug
- Custom specific basic FPGA board and/or mezzanine FPGA module design on request
- Custom specific front I/O mezzanine card design on request (e.g. M12-D connectors)
Applications
- General industrial networking, FPGA programmable
- Ethernet switch and/or Ethernet NIC functionality
- Mixed protocols industrial Ethernet/li>
- Split-systems, hybrid systems, or system expansion applications
- Hardware suitable for e.g. EtherCAT, SERCOSIII, VARAN, ProfiNET, Ethernet/IP
- Multiprotocol router, gateway, bridge, firewall, security
- Real time applications
- Edge computing, IIoT
- Data acquisition, data concentrator, data accelerator
-
Programming Support
- FPGA Reference design available (for Intel© Quartus© Prime design software)
- Linux test tool available
- Custom specific FPGA programming on request
-
Regulatory
- Designed & manufactured in Germany
- ISO 9001 certified quality management
- Long term availability
- Rugged solution (coating, sealing, underfilling on request)
- RoHS compliant
- Industrial temperature range -40°C to +85°C
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 24.8 years
- EC Regulations EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
|
|
SY8-CYCLONE - Simplified Block Diagram
|
|
Ordering Information |
|
Please refer to
List 21 for popular SKU
|
|
