|
Feature Summary
|
General
- PICMG® CompactPCI® Serial standard (CPCI-S.0)
- Single size Eurocard 3U 4HP 100x160mm2
- Suitable for CompactPCI® Serial peripheral slot (PCI Express® enabled)
- CompactPCI® Serial backplane connector P1 for PCI Express®, single lane link
- Option CompactPCI® Serial backplane connector P6 for even more mechanical ruggedness
|
UART
- Pericom® PCI Express® Octal UART PI7C9X7958
- Eight high performance 950-class UARTs
- 16C550 software compatible
- 128-Byte FIFO for each transmitter/receiver
- Baud rate up to 15Mbps
- XON/XOFF in-band flow control
- CTS/RTS or DSR/DTR out-of-band control
- Driver enable signal for PartyLine operation
- Data frame 5, 6, 7, 8 and 9 bits
- Clock prescaling 4 to 46
- 14.4756MHz UART clock
- 58.9824MHz clock option for highest RS-485 data rates available (SU5-ENSEMBLE)
- Windows® WHQL device driver support
- QNX driver support
|
RS-485 Transceiver Modules
- Choice of three front panel connector types
- SUF-RS485 - Micro-D (20mm width module)
- SUH-RS485 - RJ45 (20mm width module)
- SUJ-RS485 - D-Sub 9-pos. (31mm width module)
- 5kV rms isolation barrier RS-485/RS-422 transceivers (Analog Devices ADM2682)
- Configurable as half- or full-duplex
- ±15 kV ESD protection on RS-485 input/output pins
- Transceiver data rate 16Mbps max.
- Connect up to 256 nodes on one PartyLine bus (driver enable control via dedicated UART mode select outputs)
- Open- and short-circuit, fail-safe receiver inputs
- High common-mode transient immunity >25 kV/µs
- Thermal shutdown protection
- Suitable e.g. for industrial fieldbus applications
|
RS-232 Transceiver Modules
- Choice of three front panel connector types
- SUE-RS232 - Micro-D (20mm width module)
- SUG-RS232 - RJ45 (20mm width module)
- SUI-RS232 - D-Sub 9-pos. (31mm width module)
- 2.5kV Isolation barrier RS-232 transceivers (Analog Devices isoPower ADM3252E)
- Transceivers meet EIA/TIA-232-E specifications
- High data rate up to 460kbps (each board tested @921.6kbps)
- ±8kV/±15kV ESD protection on Transceiver input/output pins
- High common-mode transient immunity >25 kV/µs
- Suitable for high noise data communications and diagnostic ports
|
Front Panel I/O
- Up to 4 transceiver modules RJ45 and/or Micro-D within 4HP front panel width
- RS-485 front ports isolated against each other and board circuitry
- Up to 8 transceiver modules RJ45 and/or Micro-D within 8HP front panel width
- Up to 6 transceiver modules D-Sub within 8HP front panel width (flat cable attachment, front handle replaced by screw lock)
- Any mix of transceiver modules together with custom specific front panel design, up to 12HP width
|
Option Rear I/O
- 4 x Rear I/O UART ports (TTL Level), wired to P4 for optional usage with RIO module
- Each rear I/O UART port suitable for versatile use with an appropriate transceiver on a RIO module, e.g. RS-232 or RS-232, isolated or non-isolated
- Standard rear I/O modules available (SUA-RIO for 4 x RS-232 isolated, SUB-RIO for 4 x RS-485 isolated)
- Option all 8 ports available for rear I/O (SUC-RIO)
- EKF offers custom specific rear I/O module design
|
Environment, Regulatory
- Designed & manufactured in Germany
- Certified quality management according to ISO 9001
- Long term availability
- Rugged solution (coating, sealing, underfilling on request)
- RoHS compliant
- Operation temperature -40°C to +85°C (industrial temperature range)
- Storage temperature -40°C to +85°C, max. gradient 5°C/min
- Humidity 5% ... 95% RH non condensing
- Altitude -300m ... +3000m
- Shock 15g 0.33ms, 6g 6ms
- Vibration 1g 5-2000Hz
- MTBF 53.1 years (SU3 board w/o transceiver modules)
- EC Regulatory EN55035, EN55032, EN62368-1 (CE)
|
