EKF - Short Profile
EKF - Short Profile


SRU-UPS

In-Line Board Mount Uninterruptible Power Supply

HTML documents available here

PDF documents available here

SRU-UPS
Description
Ordered List
Product Information
Block Diagram
General Information
Smart Solution

SRU-UPS
Download photos in print quality

Photo Gallery

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8

© EKF • Images are displayed in a secondary browser tab or window

SRU-UPS

CompactPCI® Serial • Board Mount UPS


The SRU-UPS is a power backup unit, housed on a 3U Eurocard, suitable e.g. for CompactPCI® Serial backplanes or other 19-inch based systems. Intended for use in addition (in-line) to a PSU, it can be regarded as uninterruptible power supply (UPS).

The SRU-UPS can pass through up to 60W (12V/5A) from its power input to the CPU board and peripheral cards, reasonable for small to medium systems. When a power fail situation occurs, the SRU-UPS sustains full power on its output for >10s, sufficient for a normal shutdown of the operating system without loss of data.



The SRU-UPS is also a backup solution for short power failures. During normal operation, the input voltage is forwarded to the SRU-UPS output with a small loss of <0.3V. When the UPS detects an under-voltage condition (<11.5V) on its power input, output power will be generated by a DC/DC converter instead, derived from an array of on-board ultra capacitors.

The SRU-UPS is equipped with a PwrBlade® backplane connector. EKF offers suitable CompactPCI® Serial backplanes with two adjacent PwrBlade® slots for both a removable power supply and the SRU-UPS card.


SRU-UPS

SRU-UPS

Feature Summary

  • General
    • Single size Eurocard 3U 100x157mm2
    • Front panel width 8HP
    • PwrBlade® backplane connector (+12V DC input, +12V DC output)
    • +12V DC input via PwrBlade® P4/P5 (external cable assembly, from external power supply)
    • Option +12V DC input via PwrBlade® P6/P8 (custom backplane routing)
    • Custom CompactPCI® Serial backplanes w. dual power slots available, for removable power supply and SRU-UPS adjacent in-line
  • UPS
    • In-line operation with additional power supply
    • For usage on a standard backplane PwrBlade® slot - DC input pins P4/P5 (option 1)
    • For usage on a custom backplane PwrBlade® slot - DC input pins P6/P8 (option 2)
    • Custom backplanes w. dual power slots available (PSU & UPS)
    • Normal operation is +12V input to output bypass mode
    • Backup operation is automatically entered when input power failure occurs
    • Input voltage 12VDC (11.6VDC to 16VDC)
    • Input current 5.8A nom.
    • Output power 60W both modes normal (bypass) and backup
    • Output voltage normal (bypass) mode VIN - 0.3V @100% load
    • If possible, adjust input voltage to +12.3VDC for compensation of voltage loss
    • Output voltage backup mode +12VDC ±2%, <30mV ripple, 97% efficiency typ.
    • Backup time vs. load current @25°C typ. 14s @5A, 20s @3.5A, 35s @2A, 70s @1A
    • Power fail detection when input voltage falls below +11.5VDC
    • Backup power source on-board super capacitors 4 x 100F
    • Intelligent capacitor charge sharing
    • Charge current up to 6.2A depending on output load
    • Charge time w/o output load <60s
    • Charge time w. full output load ~150s
    • Operating temperature -20°C to +70°C
    • Option power fail output signal
    • CPU Card UEFI (BIOS) support for OS emergency shutdown on power fail
    • Available for SC4-CONCERTO, SC5-FESTIVAL (PWR_FAIL#), and PC7-FESTIVAL (FAL#)
    • UEFI Setup allows variable delay and additional settings
  • Special Features
    • FCI/Amphenol PwrBlade® backplane header, 9 x power 24 x signal contacts
    • Pin assignment similar to nVent and Trenew removable power supplies (AC contacts = NC)
    • COTS CompactPCI® Serial backplane available with two adjacent (8HP pitch) PwrBlade® slots for removable power supply and and SRU-UPS (EKF part no. 932.8.04.998)
    • Backplane usage is scalable - if an UPS is not required power supply can be moved into UPS slot
    • Custom backplane solutions CompactPCI® Serial or other Eurocard based available on request
    • Front handle micro-switch can be used as system power button replacement
  • Applications
    • Short time backup solution e.g. bridging the time gap from general power failure to emergency generator startup
    • Can be used to backup the system until normal shutdown of the operating system has been accomplished (shutdown initiated by power fail output signal from PSU or UPS)
    • System reliability enhancement for critical mains supply
  • Environmental & Regulatory
    • Designed & manufactured in Germany
    • Certified quality management according to ISO 9001
    • Long term availability
    • Rugged solution (coating, sealing, underfilling on request)
    • RoHS compliant
    • Operation temperature -20°C to +70°C
    • Storage temperature -20°C to +70°C
    • Humidity 5% ... 95% RH non condensing
    • Altitude -300m ... +3000m
    • Shock 15g 0.33ms, 6g 6ms
    • Vibration 1g 5-2000Hz
    • MTBF 230.6 years (carrier board, w/o mezzanine card)
    • EC Regulatory EN55024, EN55032, EN62368-1 (CE)


Sample Backplane w. Power Supply & SRU-UPS

Sample Backplane w. Power Supply & SRU-UPS

SRU-UPS - Simplified Block Diagram

SRU-UPS - Simplified Block Diagram

Sample Backplane for SRU-UPS

Sample Backplane for SRU-UPS

Sample Small System with SRU-UPS

Sample Small System with SRU-UPS
Ordering Information
Please refer to List 21 for popular SKU
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail